Making your flintlock ignition faster in 15 easy steps

798 Views
4 Comments
★★★★★ (5.0)
Posted on: 01/11/2014
 
IMG_9369 A fast lock - and a good shooter - is essential to shoot straight with a flintlock rifle.  Now here is a short collection about fine tuning your lock to make it as fast as possible. 1. Check the ergonomy of the lock: the sparks should fall directly into the center of the pan. You can play with the lenght of the flint adjust this position, but it's better choose a lock with good ergonomy. 2. Check your flint size: put the hammer in halfcock, close the frizzen. The edge of the flint should be cca. 1 mm from the steel. Check the width of the flint: it should not be bigger than the width of the steel. 3. Check the flint placement: wrap your flint into a piece of leather or lead sheet, and tighten the hammer screw. It should be tight in the jaws, without moving. 4. Bevel up or bevel down? Both can work. The longer way the flint travels on the steel the better your ignition will be. If the height is not good, place a piece of leather under or over the stone, to adjust height. 5. Check the spring tensions: the force of the main spring should be 3 times more than the force of the frizzen spring. If the frizzen spring is too strong the stone will break often and the frizzen will wear quickly. If you need some adjustment on the springs, take your lock to a qualified gunsmith. 6. Check the frizzen. Firzzens die. Each time you fire your flintlock the stone cuts off small metal particles from the surface. These small particles are the sparks. The frizzen surface is hardened with adding coal. If this surface vanishes, your frizzen will stop working. 7. Clean your frizzen. After each shot wipe off the residue of the priming powder. You can do it a wit a spit patch, but its better to do it with alcohol (but don't drink that while shooting please :) ). 8. Clean your stone. After each shot wipe off the residue from the stone as well. Preferably with the same cloth saturated with alcohol. 9. Place the priming powder well in your pan. Never fill the touch hole with powder. It will make your ignition secure, but the lock time will be slow. Experiment with how much space you need between the touch hole and the powder. It is different with every lock. 10. Take care for the right amount of priming powder. Too small amount will fail to ignite the main charge too much will make your ignition slow. 11. Use only the finest powder available for priming. I use OB for target shooting and 4Fg for hunting. I use 4Fg for hunting because the particles of the OB are so small, that they can pour out from the closed frizzen while stalking. The finer the powder the faster the ignition will be. 12. Sharpen your flint time to time. That's one very important task. If the flint is not sharp it will not be able to cut metal particles from the frizzen, therefore it will not spark. I'll write another post about flint sharpening later, so stay tuned! 13. Clean your touch hole after each shot. After you fired, put a pin in the touch hole and remove it only when you are to prime the lock for the next shot. 14. Change your flint often. Flints are not eternal. They die as well. If you had 70-100 good shots from a stone, you are fine. Start each competition with a new stone. I also use a new stone when I go hunting. But be careful: test the lock several time with the new stone. (without load of course). 15. When you clean the lock, never put oil on the frizzen or on the stone.
 
Tags : Blackpowder, Flintlock, Muzzleloading
Posted in: Blackpowder hunting, Blackpowder shooting, Muzzleloaders

Leave a comment

★
★
★
★
★
Security code

Comments

  • entomologist
    By: Entomologist On 19/07/2018
    Rating:
    ★★★★★ (5.0)

    What I want is a smoke pole that I can convert back and forth from cap to flint when I want. Each has its advantages in certain situations. Guess I've seen too much while serving overseas to not want every possible advantage.

  • richard
    By: Richard On 24/07/2016
    Rating:
    ★★★★★ (5.0)

    You wrote that a good flint should last 70 to 100 shots, but how about a good frizzen? About how many shots should be expected from a good frizzen before it dies? Is replacing a frizzen something that the average shooter can do, or should it be done by a gunsmith?

  • entomologist
    By: Entomologist On 19/07/2018
    Rating:
    ★★★★★ (5.0)

    What I want is a smoke pole that I can convert back and forth from cap to flint when I want. Each has its advantages in certain situations. Guess I've seen too much while serving overseas to not want every possible advantage.

  • richard
    By: Richard On 24/07/2016
    Rating:
    ★★★★★ (5.0)

    You wrote that a good flint should last 70 to 100 shots, but how about a good frizzen? About how many shots should be expected from a good frizzen before it dies? Is replacing a frizzen something that the average shooter can do, or should it be done by a gunsmith?

Related posts

Shooting the Kodiak Express double rifle
Posted in: Blackpowder hunting, Blackpowder shooting, Product reviews
02/07/2014
252 views
Our Kodiak Express rifle is an effective hunting arm, and it is unique on the market. Here is the range report on the...
Read more
Shooting the Traditional Hawken rifle
Posted in: Blackpowder hunting, Blackpowder shooting, Product reviews
02/07/2014
279 views 2 comments
These rifles are available in .50 and .54 calibers both in flintlock and percussion. We started manufacturing an...
Read more
Selecting the accurate Minié ball load in 13 easy steps
Posted in: Blackpowder shooting
03/07/2014
267 views
[caption id="attachment_72" align="alignnone" width="474"] Pedersoli 3 band Enfield on display[/caption] Choose a...
Read more
The easiest method to choose the right patch for your round ball rifle
Posted in: Blackpowder hunting, Muzzleloaders
05/07/2014
472 views
The patching material is the key to be accurate with a round ball load. A good patch is made of good quality, dense...
Read more
The vampire hunters' pistol
Posted in: Blackpowder shooting, Muzzleloaders
08/07/2014
245 views
Now this is something interesting we have hidden in the most secret drawer of the Boss. This pistol is for you if...
Read more

Categorie

Visualizza tutte le categorie

Tag del blog

firearms ban waadtlander mortimer tiro ad avancarica benchrest shotgun blackpowder reenacting measuring charges 1777 musket ifg usa bullet casting flintlock shotgun springfield debra sieloff 1854 lorenz rifle civil war flintlock rifle musket muzzleloading shotgun hunting charles moore safety napoleonic wars gibbs 1878 sharps 1874 sharps eu reloading 1857 württemberischen kinetic energy lightning percussion shogun face springfield trapdoor pedersoli remington cleaning jager rifle pedersoli muzzle loading american civil war bpcr percussion rifle percussion pistol sharps caplock .410 shotgun turkey handgonne mauser new items living history muzzleloading shooting lever action rifle volunteer rifle charleville lorenz rifle 1886 matchlock missouri river hawken

Ultimi post

Project New Barrel for an Old Waadtländer - post from a customer
Pubblicato in: Blackpowder shooting, Product reviews
14/03/2018
586 visualizzazioni
We are always happy when we receive feedback from our customers. This helps us improve, and in perfecting our...
Read more
Hole in hole accuracy of the new Pedersoli 1854 Lorenz rifle
Pubblicato in: Blackpowder shooting, Product reviews
14/03/2018
334 visualizzazioni
Dear All, We always pay attention to each and every minor details of a historical arm when we start reproducing a...
Read more
New Pedersoli items at IWA 2018
Pubblicato in: Product reviews, News of the world
14/03/2018
294 visualizzazioni 2 commenti
Dear All, Please check the latest uploads from Capandball presenting our new items at this years IWA expo in...
Read more
First shots with the Pedersoli 1854 Lorenz rifle
Pubblicato in: Blackpowder shooting, Product reviews
22/10/2017
261 visualizzazioni
Please check Capandball's teaser about one of the very first Lorenz rifles. The current short film is a teaser, so we...
Read more
1000 yard shooting with the Pedersoli 1874 Sharps rifle
Pubblicato in: Cartridge guns
22/10/2017
0 visualizzazioni
Long range shooting is pure art and hitting the metal gong at 1000 yards with an iron sight breech loading rifle from...
Read more
Visualizza tutti gli ultimi post

 Rss del blog